Gebruik de reader hieronder om de Samsung WW90DG6G94 Wasmachine handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze Samsung Wasmachine te vinden.
Handleiding
Volledig schermFoutcodes
Hieronder vindt u de error codes voor de Samsung WW90DG6G94.
Check the drum motor for operation
Try restarting the cycle. If the information code remains, contact a customer service centre.
The electronic control needs to be checked
Try restarting the cycle. If the information code remains, contact a customer service centre.
Check the drain hose
Make sure the end of the drain hose is not placed on the floor. Make sure the drain hose is not clogged. If the information code remains, contact a customer service centre.
Check the drain hose
Make sure the end of the drain hose is not placed on the floor. Make sure the drain hose is not clogged. If the information code remains, contact a customer service centre.
Water has overflowed
Restart after spinning. If the information code remains on the display, contact a local Samsung service centre.
Check the pulsator motor for operation. Low voltage detected.
Check if power is supplied properly. Check if the power cord is plugged in. If the information code remains, contact a customer service centre.
Probleemoplossing
Praktische tips om de meest voorkomende problemen met Samsung WW90DG6G94 op te lossen.
Oorzaak: Power not connected, door not closed, water supply off, Child Lock activated, or fuse/circuit breaker issue
Make sure the washing machine is plugged in. Make sure the door is properly closed. Make sure the water taps are open. Tap and hold to start. Check if Child Lock is not activated. Check the fuse or reset the circuit breaker.
Oorzaak: Water tap closed, hose frozen or clogged, low water pressure, or mesh filter clogged
Fully open the water tap. Make sure the water supply hose is not frozen or kinked. Check water pressure. Clean the mesh filter.
Oorzaak: Detergent not added to centre of drawer, rinse cap not inserted properly, or granular detergent selector not in upper position
Make sure the detergent is added to the centre of the detergent drawer. Make sure the rinse cap is inserted properly. If using granular detergent, make sure the detergent selector is in the upper position.
Oorzaak: Washing machine not level, shipping bolts not removed, laundry load unbalanced, or metal objects in drum
Install on a level, solid floor and use levelling feet if needed. Remove shipping bolts. Balance the laundry load. Remove metal objects such as coins from the drum.
Oorzaak: Door not closed, drain hose frozen or clogged, insufficient power, or debris filter clogged
Close the door and tap and hold. Make sure the drain hose is not frozen or clogged. Clean the debris filter.
Oorzaak: Door lock mechanism still engaged, water remaining in drum, or door lock light still on
Wait 3 minutes after the washing machine has stopped. Make sure all water in the drum is drained. Check that the door lock light is off.
Oorzaak: Non-HE detergent used, or too much detergent for the load
Use high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads.
Oorzaak: Door not properly closed, loose hose connections, drain hose mispositioned, overloading, or object stuck between door and diaphragm
Make sure the door is properly closed. Tighten all hose connections. Ensure the drain hose end is correctly inserted and secured. Avoid overloading. Check if something is stuck between the door and diaphragm.
Oorzaak: Excessive suds collecting in recesses, dirty door seal, or wet interior
Run cleansing cycles to sanitise periodically. Clean the door seal (diaphragm). Dry the washing machine interior after a cycle.
Oorzaak: Temperature selection incorrect, hoses connected to wrong taps, water heater not set correctly, or clogged mesh filter
Make sure the temperature selection is correct. Make sure the hoses are connected to the correct taps. Ensure the water heater is set to supply a minimum of 49°C hot water. Clean the mesh filter.
Veelgestelde Vragen
De meest gestelde vragen over de Samsung WW90DG6G94.
Hulp
Heb je vragen over de Wasmachine WW90DG6G94 van Samsung? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Wasmachine die vergelijkbaar zijn met WW90DG6G94. Probeer ook alle Samsung Wasmachine handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.