Samsung WW80CGC04DAE Wasmachine Handleiding

Water is not draining.

Make sure the drain hose is not frozen or clogged. Make sure the drain hose is positioned correctly, depending on the connection type. Clean the debris filter as it may be clogged. Make sure the drain hose is straightened all the way to the drain system. If the information code remains, contact a customer service centre.

Check communications between main and sub PBAs.

Try power off and restarting the cycle. If the information code remains, contact a customer service centre.

Operating the washing machine with the door open.

Make sure the door is properly closed. Make sure laundry is not caught in the door.

High temperature heating check.

If the information code remains, contact a customer service centre.

Check the drain hose.

Make sure the end of the drain hose is not placed on the floor. Make sure the drain hose is not clogged. If the information code remains, contact a customer service centre.

Check the drain hose.

Make sure the end of the drain hose is not placed on the floor. Make sure the drain hose is not clogged. If the information code remains, contact a customer service centre.

Water is overflowed.

Restart after spinning. If the information code remains on the display, contact a local Samsung service centre.

Spinning does not work.

Make sure laundry is spread out evenly. Make sure the washing machine is on a flat, stable surface. Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory.

The electronic control needs to be checked. Low voltage detected.

Check if power is supplied properly. Check if the power cord is plugged in. If the information code remains, contact a customer service centre.

Oorzaak: Door lock mechanism still engaged, water remaining in the drum, door lock light still on.

Press or tap Start/Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage. The door will not open until 3 minutes after the washing machine has stopped. Make sure all the water in the drum is drained. Make sure the door lock light is off.

Oorzaak: Wrong detergent type, excessive detergent amount, or using non-HE detergent.

Make sure you use the recommended types of detergent. Use high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.

Oorzaak: Low spin speed selected, non-HE detergent causing oversudsing, load too small, or drain hose kinked or clogged.

Use the High or Extra High spin speed. Use high efficiency (HE) detergent to reduce oversudsing. Make sure the drain hose is not kinked or clogged. Load should not be too small.

Oorzaak: Door not properly closed, loose hose connections, drain hose not properly secured, overloading, oversudsing, or something stuck between door and diaphragm.

Make sure the door is properly closed. Make sure all hose connections are tight. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading. Use high efficiency (HE) detergent to prevent oversudsing. Check if there is something stuck between the door and the diaphragm.

Oorzaak: Excessive suds, dirty door seal, or damp interior.

Excessive suds collect in recesses and can cause foul odours. Run cleansing cycles to sanitize periodically. Clean the door seal (diaphragm). Dry the washing machine interior after a cycle has finished.

Oorzaak: Power issue, door open, water supply problem, pause or soak period in cycle, clogged mesh filter, or insufficient power.

Plug the power cord into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press Start/Pause. Wait briefly if there is a pause or soak period in the cycle. Make sure the mesh filter of the water supply hose is not clogged. Periodically clean the mesh filter.

Oorzaak: Temperature selection incorrect, hoses connected to wrong taps, water heater not set high enough, or clogged mesh filter.

Make sure the temperature selection is correct. Make sure the hoses are connected to the correct taps. Flush water lines. Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap. Disconnect the hoses and clean the mesh filter. The water temperature may change during fill as the automatic temperature control feature checks incoming water temperature.