Asko W6424W Wasmachine Handleiding

Overfilling

Shut off the water tap. See drainage error troubleshooting.

Drainage error

Check that no objects are stuck in the drainage hose outlet. Check that the drain pump is not blocked by foreign objects and clean it. Check that there are no kinks in the drainage hose. See Care and maintenance instructions chapter.

Water Inlet Fault

Check that the tap on the water pipe is open. Check that the filter in the machine's water intake is not blocked. Shut off the water tap, unscrew the hose, clean the filter in the intake valve on the machine, screw the hose back on, turn on the tap, and run the program again.

Oorzaak: Power is off or the machine has not finished the program

If the electric power is cut, the door cannot be opened with the button. First empty the water from the washing machine using the Drain program. Ensure the main power switch is off and the plug is removed. Use the emergency door opening tool provided in the plastic bag - place it in the gap on the right side of the washer door lock and push upward to open.

Oorzaak: Power is off, door is not properly closed, or Delayed Start is selected

Check that the main power switch is on and there is power by checking your home's fuses or circuit breakers. Push the washer door firmly to ensure it is properly closed. Check if Delayed Start has been selected - press the Start/Stop button for three seconds to cancel it.

Oorzaak: The power is off

The door opening button (with key symbol) only works when the power is on. If the power is off, follow the emergency door opening procedure described above.