Electrolux T3290 Wasdroger Handleiding

Dryer is overfilled

Remove some of the clothes, close the door, and press the start button. If the error reappears, contact the laundry inspector.

Gas error (OPL laundries only)

Reset the dryer by operating it on a program with heat while the heating indicator is on. The dryer must only be reset 3 times maximum. If more resets are needed, contact a service technician.

Dryer is overfilled

Remove some of the clothes, close the door, and press the start button. If the error reappears, contact the laundry inspector.

Start button pressed while vacuum switch is already closed

Reset by opening and closing the door and pressing the start button.

Motor is overheated

Stop the dryer and wait for 5 minutes. Start again and choose a program. If the error reappears, contact the laundry inspector.

Oorzaak: Door not properly closed or door mechanism malfunction

Check that the drum stops when the loading door is opened. If the dryer operates with the door open, place the machine out of order until repairs are made.

Oorzaak: Filter door not properly closed or door mechanism malfunction

Check that the drum stops when the filter door is opened. If the dryer operates with the door open, place the machine out of order until repairs are made.

Oorzaak: Start/stop button malfunction

Check that the dryer does not start until the start/stop button is activated. Contact qualified service personnel if needed.

Oorzaak: Lifters are clogged with soap/softener residue, reducing automatic residual moisture control

Clean drum and lifters with citric acid (Acidum citricum). Use a coarse sponge if soap/softener residue remains.

Oorzaak: Lint and dust clogging air intake, exhaust duct, or surrounding areas

Check quarterly that fresh-air intake on the back, exhaust duct, and fresh-air intake to the room are not clogged by lint and dust. Ensure exhaust system connections are tight.