Bosch WTH85224GB Wasdroger Handleiding

Oorzaak: Ambient temperature is lower than 15 °C or higher than 30°C

Ensure that the ambient temperature is between 15 °C and 30 °C

Oorzaak: Air circulation at the appliance's installation location is insufficient

Ventilate the appliance's installation location

Oorzaak: Appliance's ventilation opening is blocked

Ensure that the ventilation opening of the appliance is kept clear

Oorzaak: Heat exchanger is soiled

Open the base unit, clean the heat exchanger, and close the base unit. See pages 34-36

Oorzaak: The compressor, compressor ventilation or condensation pump is active

No action required. This is not a fault

Oorzaak: The selected programme is unsuitable for the type of fabric

Set a time programme for subsequent drying. See page 24

Oorzaak: The load is too large

Observe the programme's maximum load capacity. See page 23

Oorzaak: The selected dryness level is unsuitable

Change the dryness level. See page 33

Oorzaak: The dryness level is not adjusted

Adjust the dryness level. See page 33

Oorzaak: The load is too small

Set a time programme for subsequent drying. See page 24

Oorzaak: The moisture sensor is dirty

Clean the moisture sensor. See page 37

Oorzaak: The appliance has interrupted the drying process due to the condensation container being full

Empty the condensation container. See page 32

Oorzaak: The selected programme is unsuitable for the type of fabric

Set a suitable programme. See page 23

Oorzaak: The load is unsuitable

Observe the programme's maximum load capacity. Prepare the laundry. See pages 23 and 27

Oorzaak: The laundry lies in the drum for too long after drying

Remove the laundry from the drum as soon as the drying programme has finished and spread the items for cooling

Oorzaak: Easy Care fabrics have been dried for too long

Change or adjust the dryness level. See page 33

Oorzaak: The crease-reduction function is not activated

Activate the crease-reduction function. See page 21

Oorzaak: Appliance is not correctly aligned

Align the appliance. See page 16

Oorzaak: The seal for the heat exchanger cover is dirty

Clean the seal for the heat exchanger cover. See page 30

Oorzaak: Water outlet hose is not connected correctly

Check the installation of the water outlet hose. See page 13

Oorzaak: The lever for the heat exchanger cover is not closed correctly

Ensure that the lever for the heat exchanger cover is closed correctly. See page 36

Oorzaak: The condensation container is full

Empty the condensation container. See page 32

Oorzaak: The water outlet hose is not connected correctly, is kinked or trapped

Check the installation of the water outlet hose. See page 13

Oorzaak: Water outlet hose is blocked

Rinse the water outlet hose with tap water

Oorzaak: A foreign object is in the base unit

Open the base unit, remove any foreign objects, and close the base unit. See pages 34 and 36

Oorzaak: The cooling process is active

No action required. Do not change the programme during the cooling process. The cooling process takes up to 10 minutes

Oorzaak: The programme sequence is optimised electronically

No action required. This is not a fault