Thermador DWHD94BP Vaatwasser Handleiding

Oorzaak: Water supply line may be shut off

Check the water supply valve and open it if it's shut

Oorzaak: Detergent dispenser cover not correctly shut or cycle not finished

Ensure you are correctly shutting the detergent dispenser cover. If a cycle was not finished, cancel it and refer to the Adding Detergent and Rinse Agent section of the manual

Oorzaak: Multiple causes: incorrect detergent amount, utensils incorrectly arranged or rack overloaded, spray arm rotation blocked, spray arm nozzles clogged, filters not properly fitted, unsuitable cycle selected

Verify correct detergent amount, arrange utensils properly, ensure spray arm can rotate freely, clean spray arm nozzles, check that filters are properly fitted, and select appropriate cycle

Oorzaak: Insufficient rinse agent

Refer to the Rinse Agent Adjustment section of the manual for instructions on increasing the amount of rinse agent

Oorzaak: Multiple causes: drain hose kinked, clogged or improperly installed, drain hose not positioned correctly, filters clogged, kitchen sink drain clogged, or air gap clogged

Ensure drain hose isn't kinked or clogged and is properly installed with at least 20 inches above the dishwasher's enclosure floor. Check and clean the filter system. Check if kitchen sink drain is clogged. If an air gap is installed, ensure it is not clogged

Oorzaak: Cold incoming water temperature

Before starting the dishwasher, open the hot water faucet at the sink nearest the dishwasher and run the water until it runs hot, then turn off the water and start the dishwasher