Gebruik de reader hieronder om de Smeg DIC410 Vaatwasser handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze Smeg Vaatwasser te vinden.
Handleiding
Volledig schermFoutcodes
Hieronder vindt u de error codes voor de Smeg DIC410.
Aquastop failure - The anti-flooding system has activated (relevant models only). The system trips in case of water leaks.
Contact the after-sales service.
Safety level - The system which limits the water level inside the dishwasher has tripped.
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
Water heating malfunction - Water heating is not operating or operating incorrectly.
Repeat the wash program; if the problem persists, contact the after-sales service.
Water temperature monitoring malfunction - Temperature sensor not functioning correctly.
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
Water intake malfunction - The appliance is not taking in water or is not doing so correctly.
Check that the water connections are correct, the water supply tap is turned on and the filter is not clogged. If the problem persists, contact the after-sales service.
Water pump-out malfunction - The appliance is not pumping out the water or is not doing so correctly.
Check that the drain hose is not kinked or crushed and that the trap or filters are not clogged. If the problem persists, contact the after-sales service.
Turbine flow-regulator malfunction (relevant models only) - The intake water quantity is not being measured accurately.
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
Alternate wash system malfunction - The wash system is not operating correctly.
Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
Water intake system malfunction - The water intake system is not functioning correctly.
Contact the after-sales service.
Probleemoplossing
Praktische tips om de meest voorkomende problemen met Smeg DIC410 op te lossen.
Oorzaak: Power not connected, power outage, water tap closed, or door not properly closed
Check that the dishwasher is connected to the electricity supply, there is no power outage, the water tap is open, and the dishwasher door is properly closed.
Oorzaak: Drainage hose kinked, drainage trap blocked, or filters clogged
Check that the drainage hose is not kinked, the drainage trap is not blocked, and the dishwasher filters are not clogged.
Oorzaak: Insufficient detergent, empty salt container, incorrect loading, unsuitable program, or clogged spray arms
Check that the correct amount of detergent has been added, the salt container is not empty, the dishes have been loaded correctly, the selected program is suitable, all filters are clean and correctly installed, and the spray arm nozzles are not clogged.
Oorzaak: Empty rinse aid container, incorrect rinse aid setting, or poor quality detergent
Check that the rinse aid container is not empty, the rinse aid dispenser setting is correct, and the detergent used is of good quality and has not lost its effectiveness.
Oorzaak: Rinse aid dispenser setting too high
Check that the rinse aid dispenser setting is not too high.
Oorzaak: External elements such as fragments of rust from water pipes or cutlery, incorrect detergent dose, or incorrect water softening setting
Check that the detergent dose being used is correct, the cap of the salt container is securely closed, and the water softening setting is correct. Special products are available to remove rust marks.
Veelgestelde Vragen
De meest gestelde vragen over de Smeg DIC410.
Hulp
Heb je vragen over de Vaatwasser DIC410 van Smeg? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Vaatwasser die vergelijkbaar zijn met DIC410. Probeer ook alle Smeg Vaatwasser handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.