Samsung DW80M9550U Vaatwasser Handleiding

Oorzaak: Hot water inlet hose is twisted, bent, or not properly connected; adapter overtightened; dishwasher not level (tilted more than 1 degree); door not closing completely

Ensure hot water inlet hose is straight and properly connected to adapter joint. Do not overtighten adapter (less than 280 lb·in/31.6 N·m). Level the dishwasher using the leveling feet - it should not tilt more than 1 degree. Ensure door closes completely and separators are properly installed.

Oorzaak: Dishwasher is not level; installed on uneven surface; missing leveling foot; side separators not properly aligned

Use a level to check front-to-back and side-to-side leveling. Adjust the three leveling feet at the bottom of the dishwasher until level. Ensure all three feet are present. Check that separator caps are correctly positioned and not deformed by overtightened screws.

Oorzaak: Foreign objects (screws, bolts, wood pieces) fell inside the dishwasher during installation; internal components damaged

If a foreign object is visible and accessible, remove it carefully. If unable to remove the object, contact a qualified technician for disassembly and removal. To prevent this during future installation, cover the interior with a towel while working with the door open and use a magnetic screwdriver.

Oorzaak: Drain hose not properly routed; no air gap installed when required; drain hose positioned below sink basin level

If there is no air gap, hang the drain hose at least halfway above the base of the cabinet to prevent backflow. Follow regional plumbing codes for proper drain connection. Ensure drain hose is not kinked or bent. Use hose clamps to secure all connections.

Oorzaak: Hot water inlet hose, drain hose, or power cable caught or pinched; excess hose length not removed; attempting to move alone

Gently remove excess hot water inlet hose, drain hose, and power cable while slowly sliding the dishwasher into position. Ensure hoses and cables are not twisted, bent, or caught under the appliance. Route the hot water inlet to the left side and power cable to the right side channel. Get assistance from another person if needed.