Gebruik de reader hieronder om de BEKO DIS28120 Vaatwasser handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze BEKO Vaatwasser te vinden.

Handleiding

Volledig scherm
Volledig scherm
Deel deze handleiding BEKO
Was deze handleiding nuttig?

Probleemoplossing

Praktische tips om de meest voorkomende problemen met BEKO DIS28120 op te lossen.

Machine does not start power

Oorzaak: Power cable is unplugged, fuse is blown, water inlet tap is closed, door is open, or On/Off button is not pressed

Oplossing

Check if the power cable is plugged in. Check the fuses in your house. Make sure that the water inlet tap is open. Make sure that you have closed the door of the machine. Make sure that you have turned on the machine by pressing the On/Off button.

Dishes are not washed clean performance

Oorzaak: Dishes not placed orderly, unsuitable programme selected, impellers stuck or clogged, filters clogged or installed incorrectly, baskets overloaded, detergent stored improperly or insufficient, rinse aid insufficient, or detergent dispenser lid left open

Oplossing

Load the dishes as described in the user manual. Select a programme with a higher temperature and cycle time. Turn the lower and upper impellers by hand to make sure they rotate freely. Clean the impellers and filter system regularly. Do not overload the baskets. Store detergent in a closed container in dry conditions. Adjust the amount of detergent according to soiling degree. Check the rinse aid indicator and add if necessary. Make sure the detergent dispenser lid is closed tightly.

Dishes are not dry at the end of cycle performance

Oorzaak: Dishes not placed orderly, rinse aid insufficient, machine unloaded too quickly after programme completion, unsuitable programme selected, or deteriorated surface quality of kitchen utensils

Oplossing

Place dishes in a way that no water accumulates in them. Check and add rinse aid if necessary. Do not unload the machine right after washing; wait for steam to evacuate and dishes to cool down. Slightly open the door first and unload starting from the lower basket. Select programmes with longer duration for higher drying performance. Do not wash kitchen utensils with deteriorated surfaces in the dishwasher.

Tea, cafe or lipstick stains remain on dishes performance

Oorzaak: Unsuitable programme selected, deteriorated surface quality of kitchen utensils, or detergent stored under unsuitable conditions

Oplossing

Select a programme with a higher temperature and cycle time. Do not wash kitchen utensils with deteriorated surfaces in the dishwasher. Store powder detergent in a closed container in dry places; use tablet detergents for better results.

Lime traces remain on dishes and glassware gains a misty appearance water

Oorzaak: Rinse aid insufficient, water hardness setting is low, salt level is insufficient, or salt leakage exists

Oplossing

Check the rinse aid indicator and add if necessary. Increase the rinse aid setting if there is enough amount in the machine. Measure the hardness of the supply water and check the water hardness setting appropriately. Pay attention not to spill salt around the salt filling hole. Make sure the salt reservoir lid is tightly closed. Run the prewash programme to remove spilled salt.

There is a different odour in the machine maintenance

Oorzaak: Filters are clogged or dirty dishes are kept in the dishwasher for 2-3 days without running the machine

Oplossing

Check and clean the filter system regularly. If not starting the machine immediately after loading dishes, remove food remnants and run the Prewash programme without detergent every 2 days. Do not close the door completely to avoid odour build-up. Use commercially available odour removers or machine cleaners.

Rust, discoloration or surface deterioration occurs on dishes maintenance

Oorzaak: Salt leakage exists, salty food remnants have remained on dishes, electric installation is not grounded, intensive cleansers are used, metal items used improperly, cutlery made of low quality stainless steel, or corroded items are washed in the dishwasher

Oplossing

Pay attention not to spill salt around the salt filling hole and keep the salt reservoir lid tightly closed. Remove dirt from dishes with salty food remnants by prewash or wash without waiting. Check if your machine is connected to the actual grounding line. Do not wash dishes with bleach or other intensive cleansers. Use metal kitchen utensils only for their intended purposes. Do not wash low quality stainless steel cutlery or already corroded items in the dishwasher.

Detergent remains in detergent dispenser maintenance

Oorzaak: Detergent dispenser was damp when adding detergent, detergent was added long before washing process, detergent dispenser lid opening prevented during washing, detergent stored under unsuitable conditions, or impeller holes are clogged

Oplossing

Make sure the detergent dispenser is dried well prior to filling it. Add detergent shortly before start-up of washing. Place dishes in a way that will not prevent the detergent dispenser lid from opening. Store detergent in a closed container in dry places. Clean the impeller holes regularly as they might be clogged with food remnants.

Dishes are scratched maintenance

Oorzaak: Salt leakage exists, water hardness setting is low, salt level is insufficient, or dishes are not placed orderly in the machine

Oplossing

Pay attention not to spill salt around the salt filling hole as spilled salt can cause scratches. Make sure the salt reservoir lid is tightly closed and run the prewash programme to remove spilled salt. Measure the hardness of the supply water and check the water hardness setting. When placing glasses into the basket, lean them against the edges or racks of the basket or the glass support tines, not against other dishes.

A smear remains on glasses that resembles milk stain or a bluish/rainbow appearance occurs when the glass is pointed to light water

Oorzaak: Excessive rinse aid is used or corrosion has occurred on glass due to soft water

Oplossing

Lower the rinse aid setting and clean spilled rinse aid when adding it. Measure the hardness of the supply water and check the water hardness setting appropriately. If supply water is soft (<5 dH), do not use salt and choose programmes that wash in higher temperatures (60-65°C). Use glass protective detergents that are commercially available.

Foam forms in the machine maintenance

Oorzaak: Dishes were washed with hand-wash detergent by hand but not rinsed before placing them into the machine or rinse aid has spilled into the machine

Oplossing

Remove coarse soil from dishes under tap water with a tissue paper or fork before placing them in the machine; there is no need to hand-wash the dishes. Take care that rinse aid is not spilled in the machine when filling it and clean any spilled rinse aid with a tissue paper or towel.

Veelgestelde Vragen

De meest gestelde vragen over de BEKO DIS28120.

Controleer of het netsnoer is aangesloten, de huiszekeringen in orde zijn, de waterkraan open staat, de deur gesloten is, en of u de Aan/Uit-knop hebt ingedrukt.

Plaats de vaten netjes in de machine, selecteer een programma met hogere temperatuur en cyclusduur, zorg dat de verstuivers vrij kunnen draaien, controleer dat de filters schoon zijn, overbelast de manden niet, en gebruik voldoende wasmiddel.

Plaats de vaten netjes zodat water niet ophoopt, controleer en voeg spoelglans toe indien nodig, open de deur niet onmiddellijk na het programma, wacht tot de stoom is verdwenen en de vaten zijn afgekoeld, en selecteer programma's met langere duur.

Controleer de waterhardheidinstelling, zorg dat er voldoende zout in de machine zit, gebruik voldoende spoelglans, en zorg dat u geen zout morst rond de vulopening en het deksel goed sluit.

Controleer of de filters schoon zijn en reinig ze regelmatig. Als u de machine niet direct gaat starten na het inladen van vaten, verwijder dan voedsels en draai eens per twee dagen het voorspoelprogram zonder wasmiddel. Laat de deur niet helemaal gesloten om geuroverlast te voorkomen.

Bewaar poederwasmiddel in een gesloten bak op een droge plek en niet op vochtige plaatsen. Voor gemakkelijke opslag wordt geadviseerd tabletwasmiddelen te gebruiken.

Zorg dat de dispenser goed droog is voordat u wasmiddel toevoegt, voeg wasmiddel kort voor het start van de was toe, plaats vaten niet tegen de dispenser zodat deze kan openen, zorg voor goede opslag van wasmiddel, en controleer dat de verstuivers niet verstopt zijn.

Zorg dat u geen zout morst rond de vuleopening, sluit het zoutreservoirdeksel goed, verwijder zout van zoutige voedsels voordat u vaten in de machine doet, zorg voor proper aarding van de machine, gebruik geen bleekmiddelen, en was niet van slechte kwaliteit roestvrijstaal of al geroeste items in de vaatwasser.

Verlaag de spoelglansinstelling en controleer dat u geen spoelglans morst. Meet de waterhardheidinstelling; bij zacht water (<5 dH) geen zout gebruiken en selecteer programma's met hogere temperatuur (60-65°C). Gebruik commercieel beschikbare glasscoliëren detergentia.

Verwijder grof vuil van vaten onder stromend water met tissues of vork voordat u ze in de machine plaatst; handwas-afwasmiddelen bevatten geen antischuim. Zorg dat spoelglans niet in de machine wordt gemorst en reinig gemorste spoelglans met tissues.

Hulp

Heb je vragen over de Vaatwasser DIS28120 van BEKO? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.

Hieronder vindt u handleidingen voor Vaatwasser die vergelijkbaar zijn met DIS28120. Probeer ook alle BEKO Vaatwasser handleidingen te bekijken

Discussie

Laat een opmerking achter of stel een vraag

Doe mee aan de discussie

Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.

Voer hier uw bericht in
Voer uw naam in
Voer uw e-mailadres in