Element ELEFW248 Televisie Handleiding

Oorzaak: Volume set too low

Check volume settings.

Oorzaak: External leads not connected

Check that all external leads are connected properly.

Oorzaak: Main plug not connected

Check that the main plug has been connected to a wall outlet.

Oorzaak: Power not turned on

Check that you have pressed the POWER on the front of the TV set.

Oorzaak: Incorrect picture settings

Check the picture contrast and the brightness setting.

Oorzaak: TV in standby mode

Press either the Power button or the Standby button on the remote control.

Oorzaak: Sound muted

Press the MUTE button.

Oorzaak: Low volume

Check the volume.

Oorzaak: Broadcast problem

Try another channel, the problem may be with the broadcast.

Oorzaak: Audio cables not installed properly

Are the audio cables installed properly?

Oorzaak: Objects between TV and remote

Check to see if there are any objects between the TV and remote control causing obstruction.

Oorzaak: Batteries installed incorrectly

Are batteries installed with correct polarity (+/-)?

Oorzaak: Incorrect remote operating mode

Correct remote operating mode set: TV, VCR, etc?

Oorzaak: Dead batteries

Install new batteries.

Oorzaak: Sleep timer set

Is the sleep timer set?

Oorzaak: Power connection interrupted

Check the power connection, power may be interrupted.

Oorzaak: Normal startup process

This is normal, the image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes.

Oorzaak: No broadcast on tuned station

No broadcast on the station tuned.

Oorzaak: Color settings incorrect

Adjust the color in Menu option.

Oorzaak: Interference from VCR

Keep a sufficient distance between the product and the VCR.

Oorzaak: Broadcast problem

Try another channel, the problem may be with the broadcast.

Oorzaak: VIDEO cables not installed properly

Are the VIDEO cables installed properly?

Oorzaak: Brightness function not activated

Activate any function to restore the brightness of the picture.

Oorzaak: Local interference

Check for local interference, such as an electrical appliance or power tool.

Oorzaak: Incorrect source

Press the SOURCE button to select correct source.

Oorzaak: Station or cable problems

Station or cable experiencing problems. Tune to another station.

Oorzaak: Weak station signal

Station signal is weak, reorient antenna for better reception.

Oorzaak: Interference sources

Check for sources of possible interference.

Oorzaak: Antenna problem

Check the antenna (change the direction of the antenna).

Oorzaak: Incorrect balance setting

Adjust balance in the Menu option.

Oorzaak: Resolution or frequency incorrect

Adjust resolution, horizontal or vertical frequency.

Oorzaak: Signal cable not connected or loose

Check whether the signal cable is connected or loose.

Oorzaak: Incorrect input source

Check the input source.

Oorzaak: Clock, phase, or position incorrect

Set the autoconfigure or adjust clock, phase, or H/V position.

Oorzaak: Signal cable problem

Check the signal cable.

Oorzaak: PC video card problem

Reinstall the PC video card.