Gebruik de reader hieronder om de Xiaomi Roborock E2 Stofzuiger handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze Xiaomi Stofzuiger te vinden.
Handleiding
Volledig schermFoutcodes
Hieronder vindt u de error codes voor de Xiaomi Roborock E2.
Filter error
Check that the filter is dry or clean the filter. Leave it to dry for at least 24 hours if not completely dry. If the problem persists, replace the filter.
A high-intensity magnetic field is detected
The machine is too close to the virtual wall when starting up. Move it to a new location and start it.
Battery level is too low
Charge the battery before use.
Charging error
Use a dry cloth to wipe the charging contact of the machine and the charging tab of the dock charger.
Battery error
The battery temperature is too high or too low. Wait until the battery temperature is normal before use.
Side brush module error
Try resetting the system.
Vacuum cleaner fan error
Try resetting the system.
Bumper is stuck
Lightly and repeatedly tap the bumper to remove foreign matter. If no foreign matter is found, move the machine to a new location and start it.
Motion tracking sensor error
The motion tracking sensor may be dirty or blocked. Use a dry cloth to wipe the motion tracking sensor and place the machine back to its original location and start it.
Dock charger signal emission area blocked
The dock charger is blocked by dust or foreign matter. Please remove it.
The wheels are suspended
Move the machine to a place near its original location and start it.
The machine is suspended
Move it to a place near its original location and start it. Wipe the cliff sensor to eliminate this problem if it is too dirty.
The main brush may be entangled with foreign matter
Remove the main brush and its bearing for cleaning.
The side brush may be entangled with foreign matter
Remove and clean the side brush.
Main wheel exception
Check whether the main wheel is entangled with foreign matter or move the machine to a place near its original location and start it.
The machine may get stuck or caught on objects
Clear obstacles around the machine.
Dust bin and filter installation error
Reinstall the dust bin and filter and check that they are installed in place. If the problem persists, try replacing the filter.
Probleemoplossing
Praktische tips om de meest voorkomende problemen met Xiaomi Roborock E2 op te lossen.
Oorzaak: Malfunction due to internal error.
Please try to reset the system.
Oorzaak: Various mechanical, sensor, or battery issues.
Refer to the error code table and follow the specific resolution for the displayed error number. Resetting the system may solve some problems.
Hulp
Heb je vragen over de Stofzuiger Roborock E2 van Xiaomi? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Stofzuiger die vergelijkbaar zijn met Roborock E2. Probeer ook alle Xiaomi Stofzuiger handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.