Gebruik de reader hieronder om de Keurig K•Café Koffiezetapparaat handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze Keurig Koffiezetapparaat te vinden.
Handleiding
Volledig schermProbleemoplossing
Praktische tips om de meest voorkomende problemen met Keurig K•Café op te lossen.
Oorzaak: K-Cup pod holder handle not pushed down securely or brew buttons not flashing
After placing the K-Cup pod in the pod holder, push the handle down securely and ensure the brew buttons are flashing
Oorzaak: Water reservoir is empty or not seated properly
Fill the water reservoir to and not beyond the MAX fill line. Make sure the water reservoir is seated properly in its base
Oorzaak: Exit needle may be clogged
Clean the exit needle of the K-Cup pod holder using a straightened paper clip or similar tool
Oorzaak: Water reservoir was removed during brewing
Replace the water reservoir and perform a rinsing brew without a K-Cup pod
Oorzaak: Brewer needs descaling
Perform the descaling procedure. If problem persists after two descaling cycles, contact Customer Service
Oorzaak: Grounds gathered in exit or entrance needles
Clean the exit needle and entrance needle of the K-Cup pod holder using a straightened paper clip or similar tool
Oorzaak: Power button not turned on
Make sure that the power button has been turned on
Oorzaak: Electric circuit overloaded with other appliances
Plug brewer into its own grounded outlet. The brewer should be operated on its own circuit, separate from other appliances
Oorzaak: Auto Off feature activated
Auto Off sets the brewer to turn off 2 hours after the last brew for energy savings. Refer to Brewer Features for instructions on enabling and disabling this feature
Oorzaak: Milk not suitable for frothing or frother malfunction
Please call Customer Service
Oorzaak: Attempting to froth while brewing coffee
Wait for the brew cycle to complete. Once the brew cycle is complete, the frother will automatically start frothing
Oorzaak: Milk missing from frother, whisk not correctly placed, or frother not properly seated
Check to make sure there is milk in the frother, the whisk is correctly placed in the frother, and the frother is properly seated on the base
Oorzaak: Frother actively in use
Wait 30 seconds after the frother has finished frothing then try brewing again. If you still cannot brew, contact Customer Service
Oorzaak: Water quality issues (chlorine or mineral tastes)
Use bottled or filtered water instead of tap water. Do not use distilled water. You can also install a Keurig Water Filter to help remove water impurities and improve beverage taste
Oorzaak: Heavy scale buildup causing air to blow out
Turn off and unplug the brewer. If there is Keurig Descaling Solution in the water reservoir, discard the contents and rinse thoroughly. Refill with water, plug back in, power on, and repeat the Fresh Water Rinse cycle. If problem persists, allow brewer to sit unplugged for at least 30 minutes before continuing
Veelgestelde Vragen
De meest gestelde vragen over de Keurig K•Café.
Hulp
Heb je vragen over de Koffiezetapparaat K•Café van Keurig? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Koffiezetapparaat die vergelijkbaar zijn met K•Café. Probeer ook alle Keurig Koffiezetapparaat handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.