1. Introduction
5
1.1 Lxme2 Controller Overview
5
1.2 Controller Features
5
1.3 In The Box
6
1.4 Regulatory Compliance
6
1.5 Valves (Stations)
7
1.6 Programming Overview
7
1.6.1 Programs
7
1.6.2 Storing The Quick Start Guide
7
1.6.3 Remote Programming
7
1.7 Interface Overview
8
1.8 Programming Checklist
9
1.8.1 Set Up Hardware
9
1.8.2 Set Up Programs
9
1.8.3 Set Up Advanced Programming (Optional)
9
1.8.4 Review Setup
10
1.8.5 Additional Advanced Programming (Optional)
10
2. Auto
11
2.1 Alarms
12
3. Set Date/Time
13
4. Setup
14
4.1 Master Valves
14
4.2 Weather Sensors
20
4.3 Station Setup
21
4.3.1 Station Priority
21
4.3.2 Master Valves/ Pumps
22
4.3.3 Weather Sensors
22
4.3.4 Valves Per Station
23
4.3.5 Flow Sensors - Models Only
23
4.4 Advanced Station Settings
27
4.4.1 Cycle + Soak (Advanced Station Settings)
27
4.4.2 Copy Station To Station
28
4.4.3 Station Delay (Advanced Station Settings)
28
4.4.4 Simulstations (Advanced Station Settings)
29
4.4.5 Station Sequencing (Advanced Station Settings)
30
4.4.6 Module/ Station Numbering (Advanced Station Settings)
32
5. Set Start Times
33
6. Run Times
34
6.4.1 Copy Run Times
35
7. Water Days
36
7.4.1 Custom, By Day Of Week
36
7.4.2 Cyclic Days
37
7.4.3 Even Days, Odd Days, Odd No 31St
38
8. Weather Sensors
39
9. Diagnostics
40
9.4.1 Test All Stations
40
9.4.2 Raster Wiring Test
40
9.4.3 Conrm Programming
41
9.4.4 Program Summary
41
9.4.5 Review Programs
43
9.4.6 Program Run Times
45
9.4.7 Station Run Times
46
9.4.8 Master Valve Status
47
9.4.9 Weather Sensor Status
47
10. Alarms/ History
48
10.4.1 Flow History
48
10.4.2 Clear Flow History
48
10.4.3 Flow Alarms
49
11. Seasonal Adjust
51
11.4.1 Individual Program
51
11.4.2 By Month
51
12. Delay Watering
54
12.4.1 Rain Delay
54
12.4.2 Calendar Day O
54
12.4.3 Program Water Window
55
12.4.4 Water Window Set Up
56
13. Flow Sensor
57
13.4.1 Introduction To Flow
57
13.4.2 Flozones Overview
57
13.4.3 Flow Management Features
57
13.1 Flow Sensors
57
13.1.1 Selected Stations
59
13.1.2 Set Station Rates
61
13.1.3 Set Flozone Rates
62
13.1.4 View Flow Rates
62
13.1.5 View Flozone Rates
64
13.1.6 Clear Flow Rates
64
13.1.7 Set Flo-Manager®
65
13.1.8 Flo-Manager® Set Up
65
13.1.9 Enable Or Disable Flo-Manager®
65
13.1.10 Set Flowatch™
65
13.1.11 Flowatch™ Set Up
66
13.1.12 Flowatch™ On/O
67
13.1.13 Set Flow Limits
67
13.1.14 Set Up And Congure High Flow And Low Flow
68
13.1.15 Set Flow Actions
69
13.1.16 Current Flow Reading
69
13.1.17 Set Flow Units
70
14. Advanced Settings
71
14.1.1 Store/ Recall Programs
71
14.1.2 Factory Defaults
75
14.1.3 About This Lxme2
76
15. Manual Watering
77
15.1.1 Start Station
77
15.1.2 Start Program
78
15.1.4 Mv (Master Valve) Water Window
78
15.1.5 Manual Mv Open
80
16. Off
81
16.1.1 Adjust Display Contrast
81
16.1.2 Close Master Valves
81
17. Installation
82
17.1 Install The Controller
82
17.1.1 Installation Checklist
82
17.1.2 Check Box Contents
82
17.2 Select Location For Controller
83
17.2.1 Gather Installation Tools
83
17.2.2 Access Controller Cabinet
84
17.3 Mount The Controller
85
17.4 Connect Source Power
85
17.4.1 Install Base And Station Module (Bcm Or Psm)
86
17.4.2 Install Station Module
86
17.5 Dynamic Station Numbering
87
17.5.1 Connect Field Wiring
88
17.5.2 Connect Local Weather Sensor
88
17.5.3 Connect A Flow Sensor - Models Only
89
17.5.4 Verify Field Installation
90
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.