Gebruik de reader hieronder om de Dell M110 Beamer handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze Dell Beamer te vinden.
Handleiding
Volledig schermProbleemoplossing
Praktische tips om de meest voorkomende problemen met Dell M110 op te lossen.
Oorzaak: Insufficient memory capacity
Delete unnecessary image files
Oorzaak: Low battery capacity
Insert fresh batteries
Oorzaak: Battery is inserted incorrectly with the polarities reversed
Insert the battery according to the polarity marks (+, -)
Oorzaak: The memory card has not been formatted
Format the memory card
Oorzaak: The memory card is exhausted
Insert a new memory card
Oorzaak: The memory card is locked
Refer to [Card Locked!] error message
Oorzaak: There is low battery capacity
Insert fresh batteries
Oorzaak: The battery is exhausted
Insert fresh batteries
Oorzaak: Battery is inserted incorrectly with the polarities reversed
Insert the battery according to the polarity marks (+, -)
Oorzaak: The camera's power is off
Turn the camera power on
Oorzaak: The Camera is turned off automatically
Turn on the camera power again
Oorzaak: The Camera is being used in low temperatures
Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in order to take images
Oorzaak: The camera stopped due to a malfunction
Remove /re-insert battery and switch the camera on
Oorzaak: A picture was taken of the subject without setting an appropriate macro mode
Select an appropriate macro mode to take a clear image
Oorzaak: Taking a picture beyond the flash range
Take a picture within the flash range
Oorzaak: The lens is smudged or dirty
Clean the lens
Oorzaak: Flash off mode has been selected
Dis-engage flash off mode
Oorzaak: The camera mode can't use the flash
Refer to the FLASH instruction
Oorzaak: Exposure is excessive
Reset exposure compensation
Oorzaak: The external monitor has not been connected properly with the camera
Check the connection cables
Oorzaak: There are incorrect files in the memory card
Insert a memory card that has correct files
Oorzaak: The date and time have been set incorrectly or the camera has adopted the default settings
Reset the date and time correctly
Oorzaak: Camera malfunction
Remove/re-insert battery and switch the camera on
Oorzaak: The camera is off
Turn the camera on
Oorzaak: Incorrect memory card format
Re-format the memory card
Oorzaak: Cable connection is incorrect
Check the connection
Oorzaak: The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.0 - 10.4. Alternatively the PC does not support USB
Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.0 - 10.4 to PC
Oorzaak: The camera driver is not installed
Install a [USB Storage Driver]
Oorzaak: Incorrect file name (Violation of DCF format)
Do not change the image file name
Oorzaak: White balance or effect setting is incorrect
Select appropriate White balance and effect
Oorzaak: USB cable connection issue
Connect the supplied USB cable
Oorzaak: Camera driver not correctly installed
Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera
Oorzaak: File transfer error
Turn the camera power off and on again. Transfer the file again
Oorzaak: PC and USB hub are not compatible
Wherever possible, connect the camera to the PC directly
Oorzaak: The camera may malfunction when it is connected to the PC at the same time as another USB cable
Disconnect the other USB cable, and connect only one USB cable to the camera
Oorzaak: Driver issue
Right-click on the entry with the question or exclamation mark and select 'Remove'. Restart the PC and connect the camera again
Oorzaak: Security program interference
Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program
Oorzaak: Computer may not recognise the camera when connected to front USB port
Connect the camera to the USB port located on the back of the computer
Oorzaak: DirectX 9.0 or later is not installed
Install the DirectX 9.0 or later from the CD provided with the camera
Oorzaak: PC not recognising the camera after repeated connections
Re-start the PC
Oorzaak: Windows startup conflict with camera connection
Disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC
Oorzaak: Only Samsung Master installed without other application programs
Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar. Install all the application programs included in the software CD
Veelgestelde Vragen
De meest gestelde vragen over de Dell M110.
Hulp
Heb je vragen over de Beamer M110 van Dell? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Beamer die vergelijkbaar zijn met M110. Probeer ook alle Dell Beamer handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.