Battery hooked up backwards Make sure battery is properly connected

RetroSound Motor 1 Autoradio Handleiding

Q: Radio will not turn on (no lights, no sound)

Ground (black) wire not connected Check ground connection

Q: Radio will not turn on (no lights, no sound)

Fuse on constant +12V (yellow) wire is blown Replace blown fuse

Q: No sound heard from unit but unit lights up

Volume turned all the way down Increase radio volume

Q: No sound heard from unit but unit lights up

Internal amp in protection mode Check speaker leads for any grounded or shorted wires

Q: No sound heard from unit but unit lights up

Wrong source mode selected Make sure the unit is in the desired source mode (RADIO, AUX)

Q: Unit blows fuses

Possible short in wiring or incorrect fuse used Make sure only fuses with correct 15 amp ratings are used and check all wiring connections for possible short

Gebruik de reader hieronder om de RetroSound Motor 1 Autoradio handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze RetroSound Autoradio te vinden.

Handleiding

Volledig scherm

Deel deze handleiding RetroSound

WhatsApp Email

Was deze handleiding nuttig?

Probleemoplossing

Praktische tips om de meest voorkomende problemen met RetroSound Motor 1 op te lossen.

Radio will not turn on (no lights, no sound) power

Oorzaak: Constant +12V (yellow) wire not connected or incorrect voltage

Oplossing

Check all connections are proper voltage with a volt meter. Voltage range: 12-15 volts

Radio will not turn on (no lights, no sound) power

Oorzaak: +12V ignition/accessory (red) wire not connected or incorrect voltage

Oplossing

Check +12V accessory (red) wire connection

Radio will not turn on (no lights, no sound) connectivity

Oorzaak: Ground (black) wire not connected

Oplossing

Check ground connection

Radio will not turn on (no lights, no sound) power

Oorzaak: Fuse on constant +12V (yellow) wire is blown

Oplossing

Replace blown fuse

No sound heard from unit but unit lights up performance

Oorzaak: Volume turned all the way down

Oplossing

Increase radio volume

No sound heard from unit but unit lights up connectivity

Oorzaak: Internal amp in protection mode

Oplossing

Check speaker leads for any grounded or shorted wires

No sound heard from unit but unit lights up performance

Oorzaak: Wrong source mode selected

Oplossing

Make sure the unit is in the desired source mode (RADIO, AUX)

Unit blows fuses connectivity

Oorzaak: Possible short in wiring or incorrect fuse used

Oplossing

Make sure only fuses with correct 15 amp ratings are used and check all wiring connections for possible short

Unit blows fuses power

Oorzaak: Battery hooked up backwards

Oplossing

Make sure battery is properly connected

Hulp

Heb je vragen over de Autoradio Motor 1 van RetroSound? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.

Hieronder vindt u handleidingen voor Autoradio die vergelijkbaar zijn met Motor 1. Probeer ook alle RetroSound Autoradio handleidingen te bekijken