Gebruik de reader hieronder om de JVC KD-X351BT Autoradio handleiding te lezen. U kunt de handleidingen direct op de pagina doorbladeren en de functies van onze reader gebruiken om alle belangrijke informatie over de installatie, bediening en het onderhoud van deze JVC Autoradio te vinden.
Handleiding
Volledig schermFoutcodes
Hieronder vindt u de error codes voor de JVC KD-X351BT.
Hardware error detected in the unit
Reset the unit and try the operation again. If the error persists, consult your nearest service center.
Probleemoplossing
Praktische tips om de meest voorkomende problemen met JVC KD-X351BT op te lossen.
Oorzaak: Developer options enabled on Android device or incompatible device
Switch off the developer options on the Android device. Reconnect the Android device. If this does not solve the problem, the connected Android device does not support AUTO MODE.
Oorzaak: Power saving mode enabled on Android device
Turn off the power saving mode on the Android device.
Oorzaak: No playable audio files or connection issue
Make sure Android device contains playable audio files. Reconnect the Android device. Restart the Android device.
Oorzaak: USB connection is not properly established
Ensure the device is connected properly through USB.
Oorzaak: Device is still connecting or Bluetooth connection lost
If connected via USB, please wait for connection to complete. If connected via Bluetooth, check Bluetooth connection and ensure both device and unit are paired and connected.
Oorzaak: Spotify application not connected properly or user not logged in
End the Spotify application and restart, then log in to your Spotify account.
Oorzaak: Device not in range or unit needs reset
Search from the Bluetooth device again. Reset the unit.
Oorzaak: PIN code mismatch or existing pairing information
Make sure you have entered the same PIN code to both the unit and Bluetooth device. Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
Oorzaak: Microphone position incorrect or ECHO CANCEL setting not configured
Adjust the microphone unit's position. Check the ECHO CANCEL setting.
Oorzaak: Distance too great between devices or weak signal reception
Reduce the distance between the unit and the Bluetooth device. Move the car to a place where you can get a better signal reception.
Oorzaak: Distance too great, other Bluetooth devices interfering, or connection unstable
Reduce the distance between the unit and the Bluetooth audio player. Turn off, then turn on the unit and try to connect again. Other Bluetooth devices might be trying to connect to the unit.
Oorzaak: Audio player does not support AVRCP or connection issue
Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Disconnect and connect the Bluetooth player again.
Oorzaak: Unit is preparing Bluetooth function
Turn off and turn on the unit, then connect the device again.
Oorzaak: Connected phone does not support Voice Recognition feature
Use a phone that supports Voice Recognition feature.
Oorzaak: Device does not support the function attempted
Try the operation again. If ERROR appears again, check if the device supports the function you have tried.
Oorzaak: Connected phones do not support phone switching feature
Reset the unit and try the operation again.
Veelgestelde Vragen
De meest gestelde vragen over de JVC KD-X351BT.
Hulp
Heb je vragen over de Autoradio KD-X351BT van JVC? Stel ze direct aan onze expert! Je krijgt informatie, praktische tips en oplossingen op maat in slechts enkele seconden.
Gerelateerde handleidingen
Hieronder vindt u handleidingen voor Autoradio die vergelijkbaar zijn met KD-X351BT. Probeer ook alle JVC Autoradio handleidingen te bekijken
Discussie
Laat een opmerking achter of stel een vraag
Doe mee aan de discussie
Stel een vraag over de handleiding of voeg een nuttig antwoord toe voor andere gebruikers.