Victron Cebro GX Acculader Handleiding

No results

Cerbo Gx Manual 1

Table Of Contents 2

1. Introduction 4

1.1. What Is The Cerbo Gx? 4

1.2. Whats In The Box? 4

2. Installation 5

2.1. Overview Of Connections 5

2.2. Power 5

2.3. Gx Touch Screen 6

2.4. Connecting Victron Products 8

2.4.1. Multis/Quattros/Inverters (Ve.bus Products) 8

2.4.2. Battery Monitor Bmv-700 Series; And Mppts With A Ve.direct Port 9

2.4.3. Skylla-I, Lynx Shunt Ve.can, Lynx Ion + Shunt And Mppts With A Ve.can Port 9

2.4.4. Bmv-600 Series 10

2.4.5. Dc Link Box 10

2.4.6. Ve.can Resistive Tank Sender Adapter 10

2.5. Nmea Tank Senders From Other Manufacturers 10

2.6. Connecting A Pv Inverter 10

2.7. Connecting A Usb Gps 11

2.8. Connecting A Fischer Panda Generator 11

2.9. Connecting Nmea-2000 Tank Senders 11

2.10. Connecting Imt Solar Irradiance, Temperature And Wind Sensors 11

3. Internet Connectivity 15

3.1. Ethernet Lan Port 15

3.2. Wi-Fi 15

3.3. Gx Gsm 16

3.4. Mobile (Cellular) Network Using A 3G Or 4G Router 16

3.5. Usb Tethering Using A Mobile Phone 16

3.6. Ip Configuration 16

3.7. Connecting Both Ethernet And Wi-Fi (Failover) 17

3.8. Minimize Internet Traffic 17

3.9. More Information About Setting Up An Internet Connection And Vrm 17

4. Accessing A Gx Device With Remote Console 18

4.1. Using Victronconnect Via Bluetooth 18

4.2. Accessing Via The Built-In Wifi Access Point 21

4.3. Accessing Remote Console Via The Local Lan/Wifi Network 21

4.3.1. Alternative Methods To Find The Ip Address For Remote Console 22

4.4. Accessing Via Vrm 24

5. Configuration 26

5.1. Menu Structure And Configurable Parameters 26

5.2. Battery State Of Charge (Soc) 28

5.2.1. Which Device Should I Use For Soc Calculation? 28

5.2.2. The Different Solutions Explained In Detail 28

5.2.3. Notes On Soc 29

5.2.4. Selecting Soc Source 29

5.2.5. Details On Ve.bus Soc 31

5.3. Customize The Logo On The Boat & Motorhome Page 31

6. Updating Gx Firmware 32

6.1. Via Internet Or With Microsd-Card/Usb-Stick 32

6.2. Direct Download From The Internet 32

6.3. Microsd-Card Or Usb-Stick 32

6.4. Changelog 33

7. Ve.bus Inverter/Charger Monitoring 34

7.1. Input Current-Limiter Setting 34

7.2. Phase Rotation Warning 35

7.3. Grid Failure Monitoring 36

7.4. Advanced Menu 37

8. Dvcc - Distributed Voltage And Current Control 38

8.1. Introduction And Features 38

8.2. Dvcc Requirements 39

8.3. Dvcc Effects On The Charge Algorithm 39

8.4. Dvcc Features For All Systems 40

8.4.1. Limit Charge Current 40

8.4.2. Shared Voltage Sense (Svs) 41

8.4.3. Shared Temperature Sense (Sts) 41

8.4.4. Shared Current Sense (Scs) 41

8.5. Dvcc Features When Using Can-Bus Bms Battery 41

8.6. Dvcc For Systems With The Ess Assistant 42

9. Vrm Portal 43

9.1. Vrm Portal Introduction 43

9.2. Registering On Vrm 43

9.3. Datalogging To Vrm 43

9.4. Trouble Shooting Data Logging 44

9.5. Analysing Data Offline, Without Vrm 47

9.6. Remote Console On Vrm - Trouble Shooting 47

10. Marine Mfd Integration By App 49

10.1. Introduction & Requirements 49

10.2. Compatible Mfds And Instructions 50

11. Marine Mfd Integration By Nmea 2000 51

12. Error Codes 52

13. Faq 53

13.1. Cerbo Gx Faq 53

13.2. Q2: Do I Need A Bmv To See Proper Battery State Of Charge? 53

13.3. Q3: I Have No Internet, Where Can I Insert A Sim-Card? 53

13.4. Q4: Can I Connect Both A Gx Device And A Vgr2/Ver To A Multi/Inverter/Quattro? 53

13.5. Q5: Can I Connect Multiple Color Controls To A Multi/Inverter/Quattro? 53

13.6. Q6: I See Incorrect Current (Amps) Or Power Readings On My Cerbo Gx 53

13.7. Q7: There Is A Menu Entry Named "Multi" Instead Of The Ve.bus Product Name 54

13.8. Q8: There Is A Menu Entry Named "Multi", While There Is No Inverter, Multi Or Quattro Connected 54

13.9. Q9: When I Type The Ip-Address Of The Color Control Into My Browser, I See A Web Page Mentioning Hiawatha? 54

13.10. Q10: I Have Multiple Solar Chargers Mppt 150/70 Running In Parallel. From Which One Will I See The Relay Status In The Cerbo Gx Menu? 54

13.11. Q11: How Long Should An Automatic Update Take? 54

13.12. Q12: I Have A Vgr With Io Extender, How Can I Replace This With A Cerbo Gx? 54

13.13. Q13: Can I Use Remote Veconfigure, As I Was Doing With The Vgr2? 54

13.14. Q14: The Blue Power Panel Could Be Powered Through The Ve.net Network, Can I Also Do That With A Cerbo Gx? 55

13.15. Q15: What Type Of Networking Is Used By The Cerbo Gx (Tcp And Udp Ports)? 55

13.16. Q16: What Is The Functionality Behind The Menu Item Remote Support (Ssh), In The Ethernet Menu? 55

13.17. Q17: I Don’t See Support For Ve.net Products In The List, Is That Still Coming? 55

13.18. Q18: What Is The Data Usage Of The Cerbo Gx? 56

13.19. Q19: How Many Ac Current Sensors Can I Connect In One Ve.bus System? 56

13.20. Q20: Issues With Multi Not Starting When Cerbo Gx Is Connected / Caution When Powering The Cerbo Gx From The Ac-Out Terminal Of A Ve.bus Inverter, Multi Or Quattro 56

13.21. Q21: I Love Linux, Programming, Victron And The Cerbo Gx. Can I Do More? 57

13.22. Q22: How Do I Change The Logo 57

13.23. Q23: Multi Restarts All The Time (After Every 10Sec) 57

13.24. Q24: What Is Error #42? 57

13.25. Gpl Note 58

14. More Information 59

Inhoudsopgave